It is also know as absolute sight distance. This is also called absolute minimum sight distance.
The visibility of driver depends upon following factors:
- Features of the road ahead
- Height of driver's eye above the road surface
- Height of the object above the road surface
IRC( Indian Road Congress) recommended the height of driver as 1.2 m and height of object as 0.15m above the road surface for the purpose of measuring SSD.
Factor on which Stopping Sight depends
1.Total reaction time of driver
The total reaction time of an average driver may vary from 0.5 seconds in simple situation to 3-4 seconds in extreme conditions.
2.Speed of vehicle
More the speed, More the stopping distance is required.
3.Efficiency of brakes
The efficiency of brake is 100% means wheel is fully locked. It only result into 100% skidding. To avoid skidding, braking forces should not exceed the Frictional force between tyres and road.
4.Frictional resistance between road and tyres
It depends upon coefficient of friction 'f' between the tyres of vehicle and road. This depends upon type and conditions of thr oad surface and tyres.
IRC recommends specified designed friction coefficient value of 0.35 to 0.40 depends upon design speed.
5.Gradient of Road (if any)
Analysis of SSD
The stopping sight distance is sum of:Lag Distance
The distance travelled by vehicle at uniform speed during total reaction time 't' (known as lag distance)= v × t where v = design speed (m/s)
t= total reaction time (if not given take t as 2.5 sec)
Braking distance
Braking distance can be obtained by equating the work done in stopping the vehicle and kinetic energy of vehicle moving at design speed
On plain ground
On sloping ground
Total SSD= lag distance + braking distance
You may also like:
Overtaking Sight Distance- Highway Engineering
0 Comments